This guide will instruct you to use Multitech Conduit IP67 Base Station in Easy LoRaWAN Cloud.

Step 1: To read the Hardware Guide and connect all parts of the gateway

  • The antenna MUST be connected to the gateway BEFORE power on. Otherwise, you may damage the sensitivity of LoRaWAN chip.

Step 2: To read Chapter 2 – Using the Wizard to Configure Your Device of the Manual:

  • To setup the Network and Cellular (Optional)
  • To make sure the gateway can access Internet

Step 3: To read Chapter 4 – LoRaWAN of the Manual:

  • In the left menu, click LoRaWAN®
  • Under LoRa mode, select PACKET FORWARDER

Step 4: Under LoRa Packet Forwarder Configuration, to set the following settings:

  • Network: Manual
  • Channel Plan: To select a supported frequency plan here
  • Server Address:
  • Upstream Port: Check the port in the supported frequency plans
  • Downstream Port: Check the port in the supported frequency plans
  • Click Submit, and then Save and Appy in the left menu.

Next steps:

  • You can continue with the Quickstart guides here


Start your Smart projects

Subscribe Easy LoRaWAN Cloud to try all the guides and visualize data from your LoRaWAN nodes.

Donate for helpful Guides

Feel free to buy us a coffee for helpful LoRaWAN guides.