Initial Setup for Multitech Conduit IP67 Base Station

Step 1: To read the Hardware Guide and connect all parts of the gateway

• The antenna MUST be connected to the gateway BEFORE power on. Otherwise, you may damage the sensitivity of LoRaWAN chip.

Step 2: To read Chapter 2 – Using the Wizard to Configure Your Device of the Manual:

• To setup the Network and Cellular (Optional)
• To make sure the gateway can access Internet

Step 3: To read Chapter 4 – LoRaWAN of the Manual:

• In the left menu, click LoRaWAN®
• Under LoRa mode, select PACKET FORWARDER

Step 4: Under LoRa Packet Forwarder Configuration, to set the following settings:

• Network: Manual
• Channel Plan: To select a supported frequency plan here
• Server Address: lorawanserver.easylorawan.com
• Upstream Port: Check the port in the supported frequency plans
• Downstream Port: Check the port in the supported frequency plans
• Click Submit, and then Save and Appy in the left menu.

Next steps:

• You can continue with the Quickstart guides here

Done.