This guide will instruct you to use Tektelic Kona gateways in Easy LoRaWAN Cloud.

View Services Buy Devices

1. Basic Setup

Step 1: To find the Gateway EUI

  • The Gateway EUI is the GW ID on the back of the gateway

Step 2: To download and install KonaFT

Step 3: To connect the LAN port of your gateway into the SAME network as your laptop

Step 4: To use KonaFT to find the IP of your gateway: here

Step 5:  You may want to use KonaFT to set a static IP of your gateway: here

2. LoRaWAN Configuration

We will use Packet Forwarder to connect the gateway to Easy LoRaWAN server

Step 1: SSH into the gateway

  • You should know the IP of your gateway in the previous section.
  • To use Putty to ssh into the gateway: ssh root@GATEWAY-IP-ADDRESS
  • The default password is the serial-number of the gateway which is printed on the back of the gateway (the 9 characters above the 12V = 1A line).

Step 2: To configure Packet-forwarder

"gateway_conf" {
        ...
        "server_address": "lorawan.easylorawan.com",
        "serv_port_up": 6701,
        "serv_port_down": 6701,
        ...
    }

Step 3: Restart the packet forwarder

  • /etc/init.d/pkt_fwd restart
  • Or just power off and on your gateway

Next: Now you can continue to add your gateway to Easy LoRaWAN Cloud in the guides.

5 1 vote
Article Rating
Subscribe
Notify of
0 Comments
Newest
Oldest Most Voted
Inline Feedbacks
View all comments

Need help or want some discussion?

Please chat with us on the bottom right to get help or discuss about your projects.
Thanks for reaching us.