In this guide, we will show you how to choose a good antenna for your LoRa, LoRaWAN and Meshtastic devices to achieve longest range for your LoRaWAN devices.
1. Choose a correctly tune antenna
To choose correctly tuned antennas:
- Trusted vendors: From reputable vendors with correct and good VSWR.
- Good VSWR: In antenna technology, VSWR (Voltage Standing Wave Ratio) measures how efficiently radio frequency (RF) power is transferred from a source to an antenna, indicating the degree of impedance mismatch between the antenna and the transmission line
- Correct frequency: Either 915Mhz or 868Mhz or 923Mhz or 433Mhz or 470Mhz depending on your country regulation.
2. Choose a suitable gain
Antennas with different gains have different signal patterns and fit for different usecases
- Antennas with low gain (3dBi) are best fit for devices situated at a shorter distance in the same building, city neighborhood, town or village.
- Antennas with high gain (5+ dBi) are best fit for devices situated at a longer distance in the outskirts of areas.
Higher gain is not always better:
- Higher gain antennas have narrower patterns and likely to overshoot devices at near distance and low attitude.
- Higher gain antennas are not suitable to provide coverage for devices in a building.
3. Choose color of antennas
Best practices:
- In the north, black antennas are better, while in the south, white antennas are preferable.
- The antenna is exposed to sunlight. And black surfaces heat up more than white ones.
4. Choose extension cables with low signal loss
Best practices:
- The best choice: Put your gateways and nodes in high locations and do NOT use extension cable if possible.
- Second choice: It is recommended to use as short extension cable as possible.
- Third choice: It is recommended to use LMR400 cables LoRaWAN. LMR400 cables with 50Ohm have low signal loss and suitable for outdoor environment.
- Do not use RG-8 or RG-174 due to high signal attenuation.
- Avoid (if possible) to use adapters for connectors.
- Attennuation calculator:Â here
5. Choose correct cable connectors
Best practices:
- To use N-Type (if possible) to connect to your antenna. N-Type is in bigger shape and more durable.
- To use RP-SMA (if possible) to connect to your gateways and nodes. RP-SMA is smaller and more agile.
Need help for your projects?
Please chat with us on the red chatbox to get help or discuss about your projects.
Thanks for reaching us.
