A. Helper programs for Gateways
1. Advanced IP Scanner
- To scan all IPs in the WiFi/LAN network
- https://www.advanced-ip-scanner.com
2. WinSCP:
- To upload file to Linux systems
- https://winscp.net/eng/download.php
3. Putty:
- To use commands in Linux systems
- https://www.chiark.greenend.org.uk/~sgtatham/putty/latest.html
B. Helper programs for Nodes
1. Tera Term:
- To do UART/Serial access to LoRaWAN Nodes.
- Able to see boot messages.
- https://osdn.net/projects/ttssh2/releases
To set local echo: Setup > Terminal > Check on “Local Echo”
To select Serial and a correct COM port for UART USB.
2. Driver for UART USB
- UART USB CP2102: https://www.silabs.com/developers/usb-to-uart-bridge-vcp-drivers
- UART USB CH340G: https://sparks.gogo.co.nz/ch340.html
- UART USB PL2303: https://www.prolific.com.tw/US/ShowProduct.aspx?p_id=225&pcid=41
- UART USB CH9102: http://www.wch-ic.com/downloads/CH343SER_ZIP.html
3. STMicroelectronics FlashLoader
- To flash firmware for nodes
- On Windows 10 and 11, we may need to run this program in “Compability mode with Windows 7” and wait a bit longer to detect the target.
- https://www.st.com/content/st_com/en/products/development-tools/software-development-tools/stm32-software-development-tools/stm32-programmers/flasher-stm32.html
4. STM32CubeProgrammer
- To flash firmware for nodes
- https://www.st.com/en/development-tools/stm32cubeprog.html
5. TremoProgrammer
- To flash Dragino LHT65N
- https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/&file=TremoProgrammer.rar
6. Hercules SETUP Ultility
- To send/receive UART packets to nodes
- https://www.hw-group.com/software/hercules-setup-utility
C. Helper programs for Modbus
1. Modbus Tool:
- Modbus Master and Slave
- https://github.com/ClassicDIY/ModbusTool/releases
- Notes: Address starts at 0 and in decimal. E.g: Address 1234.
2.Dragino RS485_Configure_Tool
- To configure AT commands and especially RS485 nodes.
- Manual: http://wiki.dragino.com/xwiki/bin/view/Main/RS485_Configure_Tool/
- Software: Download RS485 Configure Tool
Want to test?
Subscribe Easy LoRaWAN Cloud to try this guide on your LoRaWAN gateways and nodes.
We will help you to get started and troubleshooting.
Need help?
We can debug, write codec and remote support for your LoRaWAN devices.
Tera Term is good.
Can show the serial even at boot.
Thanks.
Yes, correct.
Enjoy the tool. 😀